Drives

• • Part
  • Part Number
  • Manufacturer
  • Description
• • Pilz 8C000089 (PMC DL6B20 Quick DC-Link > PS6A2)
  • 8C000089 (PMC DL6B20 Quick DC-Link > PS6A2)
  • Pilz
  • Rear section module for size 2 supply module: PS6A24 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately.
• • Pilz 8C000090 (PMC DL6B21 Quick DC-Link > PS6A3)
  • 8C000090 (PMC DL6B21 Quick DC-Link > PS6A3)
  • Pilz
  • Rear section module for size 3 supply module: PS6A34 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately.
• • Pilz 8C000099 (PMC output choke TEP3720-OES41 4A)
  • 8C000099 (PMC output choke TEP3720-OES41 4A)
  • Pilz
  • Output choke TEP3720-OES41 from a cable lenght > 50m, maximum of 100m Technical data: Voltage range 3x <480 VAC. Frequency range 0-200 Hz. Nominal current 4 A @ 4kHz / 3,3 A @ 8kHz. Inductance 3,2 mH.
• • Pilz 8C000100 (PMC output choke TEP3820-0CS41 17,5A)
  • 8C000100 (PMC output choke TEP3820-0CS41 17,5A)
  • Pilz
  • Output choke TEP3820-0CS41 from a cable lenght > 50m, maximum of 100m Technical data: Voltage range 3x <480 VAC. Frequency range 0-200 Hz. Nominal current 17,5 A @ 4kHz / 15,2 A @ 8kHz. Inductance 0,9 mH.
• • Pilz 8C000101 (PMC output choke TEP4020-0RS41 38A)
  • 8C000101 (PMC output choke TEP4020-0RS41 38A)
  • Pilz
  • Output choke TEP4020-0RS41 from a cable lenght > 50m, maximum of 100m Technical data: Voltage range 3x <480 VAC. Frequency range 0-200 Hz. Nominal current 38 A @ 4kHz / 30,4 A @ 8kHz. Inductance 0,42 mH.
• • Pilz 8C000102 (PMC power choke TEP4010-2US00 100A)
  • 8C000102 (PMC power choke TEP4010-2US00 100A)
  • Pilz
  • Netzdrossel TEP4010-2US00 Technical data: Voltage range 3x 400 VAC. Frequency range 50/60 Hz. Nominal current 90 A. Inductance 0,14 mH. Required for drive controllers from SD6A34.
• • Pilz 8C000103 (PMCcable FD/G4G8/005/Q25/S1)
  • 8C000103 (PMCcable FD/G4G8/005/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 5m.
• • Pilz 8C000104 (PMCcable FD/G4G8/010/Q25/S1)
  • 8C000104 (PMCcable FD/G4G8/010/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 10m.
• • Pilz 8C000105 (PMCcable FD/G4G8/015/Q25/S1)
  • 8C000105 (PMCcable FD/G4G8/015/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 15m.
• • Pilz 8C000106 (PMCcable FD/G4G8/020/Q25/S1)
  • 8C000106 (PMCcable FD/G4G8/020/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 20m.
• • Pilz 8C000107 (PMCcable FD/G4G8/2m5/Q25/S1)
  • 8C000107 (PMCcable FD/G4G8/2m5/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.15 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ301 to EZ303. Length 2,5m.
• • Pilz 8C000109 (PMCcable FD/G4GB/005/Q25/S1)
  • 8C000109 (PMCcable FD/G4GB/005/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors
• • Pilz 8C000110 (PMCcable FD/G4GB/010/Q25/S1)
  • 8C000110 (PMCcable FD/G4GB/010/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 10m.
• • Pilz 8C000111 (PMCcable FD/G4GB/015/Q25/S1)
  • 8C000111 (PMCcable FD/G4GB/015/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors
• • Pilz 8C000112 (PMCcable FD/G4GB/020/Q25/S1)
  • 8C000112 (PMCcable FD/G4GB/020/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 20m.
• • Pilz 8C000113 (PMCcable FD/G4GB/2m5/Q25/S1)
  • 8C000113 (PMCcable FD/G4GB/2m5/Q25/S1)
  • Pilz
  • Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connector 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 2,5.
• • Pilz 8C000127 (PMCcable M3/E1C5/005/1Q0/S1)
  • 8C000127 (PMCcable M3/E1C5/005/1Q0/S1)
  • Pilz
  • Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 5m.
• • Pilz 8C000128 (PMCcable M3/E1C5/010/1Q0/S1)
  • 8C000128 (PMCcable M3/E1C5/010/1Q0/S1)
  • Pilz
  • Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 10m.
• • Pilz 8C000129 (PMCcable M3/E1C5/015/1Q0/S1)
  • 8C000129 (PMCcable M3/E1C5/015/1Q0/S1)
  • Pilz
  • Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 15m
• • Pilz 8C000130 (PMCcable M3/E1C5/020/1Q0/S1)
  • 8C000130 (PMCcable M3/E1C5/020/1Q0/S1)
  • Pilz
  • Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 20m.
• • Pilz 8C000131 (PMCcable M3/E1C5/2m5/1Q0/S1)
  • 8C000131 (PMCcable M3/E1C5/2m5/1Q0/S1)
  • Pilz
  • Power cable. Cable assembled on both sides Crimp connectors <> con.15 round connector 8-pin. No. of wires and cross section (4 × 1,0 + (2 × 0,5) + (2 × 0,34)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ301 to EZ303. Length 2,5m.
• • Pilz 8C000133 (PMCcable M3/E1C3/005/6Q0/S1)
  • 8C000133 (PMCcable M3/E1C3/005/6Q0/S1)
  • Pilz
  • Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 5m.
• • Pilz 8C000134 (PMCcable M3/E1C3/010/6Q0/S1)
  • 8C000134 (PMCcable M3/E1C3/010/6Q0/S1)
  • Pilz
  • Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 10m.
• • Pilz 8C000135 (PMCcable M3/E1C3/015/6Q0/S1)
  • 8C000135 (PMCcable M3/E1C3/015/6Q0/S1)
  • Pilz
  • Power cable. cable assembled on both sides Crimp connectors <> con.40 round connector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 15m.
• • Pilz 8C000136 (PMCcable M3/E1C3/020/6Q0/S1)
  • 8C000136 (PMCcable M3/E1C3/020/6Q0/S1)
  • Pilz
  • Power cable. cable assembled on both sides Crimp connectors <> con.40 roundconnector 8-pin. No. of wires and cross section (4 × 6,0 + (2 × 1,5) + (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ705. Length 20m.