Motors & Encoders
Motors & Encoders
-
Part
Part Number
Manufacturer
Description
-
- B&R 8AC126.60-1
- 8AC126.60-1
- B&R
- ACOPOS plug-in module, EnDat 2.2 encoder interface
-
- B&R 8AXB000.0000-00
- 8AXB000.0000-00
- B&R
- Accessory set for 8AC126.60-1 for encoder buffering consisting of: battery module for lithium battery 3.6 V
-
- B&R 8B0P0220HC00.001-1
- 8B0P0220HC00.001-1
- B&R
- ACOPOSmulti power supply module passive, 22 A, AS, cold plate or pass-through mounting, passive motor short circuit brake
-
- B&R 8B0P0220HW00.001-1
- 8B0P0220HW00.001-1
- B&R
- A motor with a hanging load is connected to an ACOPOSmulti drive system with passive power supply module 8B0P with passive motor short circuit brake. If the power supply to the drive system is disconnected and the hanging load begins sinking (due to failure of the motor holding brake, for example), then the motor axis rotates and the DC bus voltage increases. If the DC bus voltage overshoots a value of 15 VDC, then the DC bus is shorted via a thyristor. This limits the speed at which the hanging load sinks. The passive motor short circuit brake is designed for up to 25 kW of power. One fault event is permitted to occur maximum once every 15 minutes for this amount of power.
-
- B&R 8B0P0440HC00.001-1
- 8B0P0440HC00.001-1
- B&R
- ACOPOSmulti power supply module passive, 44 A, AS, cold plate or pass-through mounting, passive motor short circuit brake
-
- B&R 8B0P0440HW00.001-1
- 8B0P0440HW00.001-1
- B&R
- ACOPOSmulti power supply module passive, 44 A, AS, wall mounting, passive motor short circuit brake
-
- B&R 8BAC0123.000-1
- 8BAC0123.000-1
- B&R
- ACOPOSmulti plug-in module, incremental encoder and SSI absolute encoder interface for RS422 signals
-
- B&R 8BAC0123.001-1
- 8BAC0123.001-1
- B&R
- ACOPOSmulti plug-in module, incremental encoder interface for 5 V single-ended and 5 V differential signals
-
- B&R 8BAC0123.002-1
- 8BAC0123.002-1
- B&R
- ACOPOSmulti plug-in module, incremental encoder interface for 24 V single-ended and 24 V differential signals
-
- B&R 8BAC0133.000-1
- 8BAC0133.000-1
- B&R
- ACOPOSmulti plug-in module, 3 RS422 outputs for ABR encoder emulation, 1 MHz
-
- B&R 8BCH0001.1111A-0
- 8BCH0001.1111A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 1 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0001.1312A-0
- 8BCH0001.1312A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 1 m, 4x 4 mm² + 2x 1 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0002.1111A-0
- 8BCH0002.1111A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 2 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0002.1312A-0
- 8BCH0002.1312A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 2 m, 4x 4 mm² + 2x 1 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0002.5221A-0
- 8BCH0002.5221A-0
- B&R
- ACOPOSmulti hybrid motor cable, length 2 m, 4x 2.5 mm² + 2x 0.75 mm² + 2x 0.24 mm² + 2x 2x 0.15 mm², 13-pin female hybrid motor connector made of stainless steel, food grade
-
- B&R 8BCH0003.1111A-0
- 8BCH0003.1111A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 3 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0003.1312A-0
- 8BCH0003.1312A-0
- B&R
- ACOPOSmulti hybrid motor cable, length 3 m, 4x 4 mm² + 2x 1 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0003.5221A-0
- 8BCH0003.5221A-0
- B&R
- ACOPOSmulti hybrid motor cable, length 3 m, 4x 2.5 mm² + 2x 0.75 mm² + 2x 0.24 mm² + 2x 2x 0.15 mm², 13-pin female hybrid motor connector made of stainless steel, food grade
-
- B&R 8BCH0004.1111A-0
- 8BCH0004.1111A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 4 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0004.1312A-0
- 8BCH0004.1312A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 4 m, 4x 4 mm² + 2x 1 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0005.1111A-0
- 8BCH0005.1111A-0
- B&R
- ACOPOSmulti hybrid motor cable, length 5 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0005.1312A-0
- 8BCH0005.1312A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 5 m, 4x 4 mm² + 2x 1 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0005.5221A-0
- 8BCH0005.5221A-0
- B&R
- ACOPOSmulti hybrid motor cable, length 5 m, 4x 2.5 mm² + 2x 0.75 mm² + 2x 0.24 mm² + 2x 2x 0.15 mm², 13-pin female hybrid motor connector made of stainless steel, food grade
-
- B&R 8BCH0006.1111A-0
- 8BCH0006.1111A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 6 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
-
- B&R 8BCH0006.1312A-0
- 8BCH0006.1312A-0
- B&R
- A shield plate is attached to ACOPOSmulti 8BCH hybrid motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti hybrid motor cable, length 6 m, 4x 4 mm² + 2x 1 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, integrated shield plate, can be used in cable drag chains
